Grand National Monster Trucks

13/02/2025

💥SAN ANGELO Monster Trucks LIVE! 💥
ONE Show March 8th @ 6PM!
Sign Up for Power Wheels & Side x Side Racing!🏁🏁🏁
*Share & Comment 3 Friends to WIN FREE TICKETS!*🎟

12/02/2025

SAN ANGELO Monster Trucks LIVE!
ONE Show March 8th @ 6PM!
Sign Up for Powerwheels & Side x Side Racing!
*Share & Comment 3 Friends to WIN FREE TICKETS!*

09/02/2025

Monster Trucks Return to MetraPark!🔥
🚀 FEB. 22 for 1 SHOW‼️

✅ Pro Monster Trucks as seen on TV!
✔ Double Trouble
✔ Loud & Dirty
✔ Controlled Chaos
✔ PyschoPat
✅️ DEMO DERBY! Sign-Up!
➡️ Pre-Show Meet & Greet!
✅ Kids Dance Off & Giveaways !
➡️ TOUGH Truck Competition! Sign-Up!
✅️ Kids Power Wheels Race | Sign-Up!
➡️ Monster Truck Rides!

📅 SAT., February 22, 2025 - 1 SHOW‼️
⏰️ Gates Open: 5PM
🤩 Pre-Show Meet & Greet: 5:30PM-6:30PM
💥 Engines Fire: 7PM
🏟 Secure your Tickets today to guarantee your admission!

08/02/2025

TUFF TRUCK CHALLENGE
PART OF THE MONSTER TRUCK GRAND NATIONALS
Drivers negotiate an obstacle course as they race one at a time against a stop-watch. Most events drivers will have 2 attempts to better their time.
Note: no obscene language on your truck.
Officials will not allow unsafe race trucks
Anyone smelling of beer or alcohol will not be allowed to drive or to be in the pit area.
Come sober and be safe!

First Interstate Arena
BILLINGS, MT
SATURDAY FEBRUARY 22nd 7pm
www.grandnationalmonstertrucks.com
Ph. # 346-380-5781
Monday-Friday 8am-5pm Mountain time
Entry Fee per Racer: $30 (includes driv-er) Must have a legal drivers license.
Crew Pit Pass: $30 Must be 16 or over!
Bring your vehicle to the venue's rear entrance. Racer sign-up Saturday starts
4pm and closes at 6pm.

No pit crew under 14 years old. No KIDS in the pit area! Driver and pit crew person must attend show meeting at 6:30pm.
PRIZES & AWARDS
Payoff
15t $500
2nd $300
3rd $200
Race Day Schedule
Racer sign-up
starts 3pm and closes 5pm.
Enter at the Pit Gate

TUFF TRUCK RULES
ALL CONTESTANTS AT EVERY EVENT MUST SIGN A WAIVER UNDERSTANDING THAT THEY ARE COMPETING AT THEIR OWN RISK AND THAT THEY WILL NOT BRING SUIT AGAINST ANY OFFICIALS, EMPLOYEES, EVENT SPONSORS, B & B ENTERTAINMENT GROUP,LLC, AND/OR PROPERTY OWNER. BY SIGNING THE RELEASE FORM YOU AGREE TO ALL RULES SET FORTH.
Drivers will be held responsible for the actions of their crew and family!
Drivers - Must be 18 years of age and have a valid driver's license. Only one driver per vehicle, No passengers al-Drivers must be strapped in using either the stock seat belts or racing type harness. Wear a good helmet.
Minimum of DOT helmet required.
Pit help or crew - The pit area or competitor staging area are restricted areas and only people who have signed the release and waiver form shall be in those areas. Pit area access will be allowed with a current Checkered Flag Productions provided arm band that is issued at sign-up and registration. No one under 14 years old shall be allowed to receive an arm band or be in your pit area or crew during the event. This event is being held with a Monster Truck show or other event. The pit area can be a dangerous place and by merely attending you risk life and limb. Be Safe and keep aware of other trucks and drivers. Keep out of harms way, the Monster Trucks cannot see you.
The pit area and competitor parking area is no place for children. Leave them at home or have adult supervision - Vehicle - Open to trucks or cars. Vehicles must be in good mechanical condition. No Pro-Arena type vehicles al-lowed. DOT approved tires only. Must be stock frame-no tube frames. Shocks must be mounted in stock location.
After market exhaust-open headers allowed. Suspension lift kits allowed. No nitrous oxide, superchargers or turbo's.
Tuff truck competition is not open to dune buggies.
Vehicle Safety - Roll bars, fire extinguisher, neck brace or any normal racing safety device is recommended. All vehicles must pass tech inspection before competing. If officials determine a vehicle is unsafe, officials have the right to not allow the vehicle to compete. Vehicle does not need to be street legal.
A contestant may be disqualified for either emotional or physical reasons by Competition Director or track officials.
No RECKLESSNESS; DRUGS OR DRINKING ALCOHOLIC BEVERAGES. Any driver or any of his or her pit crew consuming an intoxicating agent, and/or drugs, prior to or during the event will be disqualified from the event. Verbal or physical abuse towards any track official will result in disqualification. Vehicles must be operated in a safe manner at all times within the confines of the track, pit area, parking lot and staging areas. Track officials have the right to stop and disqualify any vehicle being operated in a reckless manner and driver might be subject to arrest.
The rules and/or regulations set forth herein are designed to provide for the orderly conduct of competition events and to establish minimum acceptable requirements for such events. By participating in these events, all participants are deemed to have complied with these rules.
NO EXPRESSED OR IMPLIED WARRANTY OF SAFETY SHALL RESULT FROM PUBLICATIONS OF OR COMPLIANCE WITH THESE RULES AND/OR REGULATIONS.
They are intended as a guide for the conduct of the sport and are in no way a guarantee against injury or death to a participant, spectator, or official.
The event director shall be empowered to permit minor deviation from any of the specifications herein or impose any further restrictions that in his opinion do not alter the minimum acceptable requirements. Any interpretation or dev
ation of these rules is left to the discretion of the officials. -Their decision is final!

04/02/2025

Metal Monster is coming to the Appalachian Wireless Arena on March 29! TICKETS on sale Soon!

31/12/2024

A month after our last show at Salisbury, we received a letter from the coliseum manager stating that there would be no more monster truck shows at their venue. After 30 plus years of successful monster truck shows in Salisbury we were not invited back. There was no discussion and no explanation as to why that decision was made. All we know is that upper management in the county made that decision. We apologize to all our fans, our sponsors and our vendors.

15/09/2024

Hispanic descent" just to let you know we celebrate this month with you!

12/09/2024

MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION
Here comes the EXCITEMENT & DESTRUCTION!
SATURDAY SEPTEMBER 28th 7pm
Kalispell, Montana Fairgrounds

🏁🏁🤣

MOTORSPORTS SPECTACULAR & NIGHT OF DESTRUCTION
SATURDAY - SEPT 28th - 7PM
Flathead County Fairgrounds
KALISPELL, MONTANA
TICKETS> www.nolimitsmonstertrucks.com/shop/

06/09/2024

Smashing Cars and Making Stars in Kalispell, Montana during the MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION No Limits Monster Trucks & Thrill Show
Coming to Kalispell on Saturday September 28th at 7pm! Rain or Shine we're going to get it on!

If you have a business and want to get involved in the largest Motorsports event in Montana get with us now! Find out how budget friendly tagging onto this event can be!

Big Ed Beckley
Phone or Text to 940-577-2698
MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION No Limits Monster Trucks & Thrill Show
No Limits Monster Trucks NWMT Fair No Limits Monster Trucks Group

30/08/2024

GET YOUR TICKETS NOW WHILE YOU HAVE A CHANCE! www.nolimitsmonstertrucks.com/shop/
No Limits Monster Trucks & Thrill Show
NWMT Fair MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION

19/08/2024

Controlled Khaos Monster Truck from Wyoming is one of the new trucks to join our No Limits Monster Trucks & Night of Destruction September 28th in Kalispell, Montana!
We are very excited for this HUGE show!

08/08/2024

MONTANA Class 2 DEMOLITION DERBY RULES
Saturday Night Sept 28th 7pm
Kalispell NWMT Fairgrounds

RULES FOR CLASS:
ALL CARS MUST REMAIN STOCK UNLESS SPECIFIED BELOW!
 ALL chrome, door handles, glass, body molding etc. must be removed. ALL interiors must be removed. Removal of the dashboard and driver’s door panel are optional. Original gas tank must be removed from car.
 Fuel tanks must be mounted securely inside the car, behind the driver’s seat. 10-gallon max capacity. Must be an approved fuel tank (boat tanks are ok). MUST BE A METAL TANK! NO PLASTIC FUEL TANKS.
 Electric fuel pumps may be used but must be mounted securely inside the car and wired to a separate switch that is clearly marked.
You may have a minimum of 1 maximum of 2 bars mounted from the firewall to the roof in the windshield area (maximum of 3” material #9 wire or chain). If running bars, you may only use 2 bolts per end of bar.
 Trimming corners of bumpers and fender wells is ok. No fastening any inner panel or webbing to outer sheet metal unless specified in the rules (EXAMPLE: You can’t bolt inner fender to outer fender etc.).
 Hoods must be bolted, chained, or wired shut (maximum 1 wrap of 3/8” chains or 3 loops of #9 wire). NO WELDING SHUT. Maximum of 2 points per side (front, back, sides). Hinges DO NOT count as points. If bolting shut, you may weld 2”x2”x2” angle iron back-to-back to hood and fender with a ½” bolt to suck together in (4) spots. You may have 3/4" all thread at core support (through factory core support hole up through hood) with (4) 3x3 washers and (4) 3/4" nuts per side. May use factory body mount or one hockey puck per side.
 Trunks - Maximum of 2 points per seam (front, back, sides). Single wrap chain, 3 loops of #9 wire, 3|/8” bolt, or a 3”x3”x1/8” plate welded. Hinges DO NOT count as points. Bolts may be no longer than 5” in length with 1.25” washers.
 Doors - Maximum of 2 points per seam. Single wrap chain, #9 wire 3/8” bolt, or 3”x3”x1/8” plate welded. An optional plate can be bolted to the outer driver’s door skin for driver protection. Plate must be a min thickness of ¼” and max thickness of ¼” Max height of 16” and must go from door seam to door seam, plate may not exceed more than 3” past door seam on either side. Plate must be fastened with min of (6) – ½” bolts and up to a max of (10) – ½” bolts. Up to 3” diameter oversized washers may be used to prevent bolts from pulling through the door. An optional window “net” or “screen” made of metal may be used over driver’s side window opening ONLY for driver protection. May be attached at up to 2 points on the roof and 2 points on the door. Drivers’ door may be welded completely shut using a 3”x1/8” flat strap. THIS IS NOT
MANDATORY, BUT IS HIGHLY RECOMMENDED!
 No chains may wrap around the frame except the hump chains.
 Body bolts and mounts must remain stock and in stock location other than at core support. No adding extra body bolts
 You may weld (2) 2”x2” a-arm straps per upper a-arm. These may only weld to a-arm and frame with a ½” weld. No other suspension modifications allowed. Overload springs must be removed. Aftermarket shackles must be removed or lowered to the lowest point. Steering and shocks may not be modified. Aftermarket steering columns are allowed. No tying in coil springs and no clamping leaf's.
Engines and transmissions must remain stock and in stock location. Motors and transmissions may be different family line to make of car. Motors and transmissions must be mounted with factory stock mounts or an after-rubber bushing style mounts with (1) bolt. Mounts may be 8”x8” max. May be fastened securely with chain only (1 per side) bolted to engine and a-arm or a-arm mount only. No welding of chain. Small lower engine cradle with front plate may be used.
(NO WELDING OF ANY FORM OTHER THAN FACTORY ENGINE MOUNTS TO ENGINE SADDLE). FACTORY STOCK MOTORS AND TRANSMISSIONS ONLY.
 Engine bolt-Ons are allowed. This includes water pump, carb, distributor, aluminum intakes, headers, pulleys, etc.
 Radiators must remain stock and in stock location. Fans may be removed. No wire mesh between radiator and fan.
 NO OTHER COOLING IS ALLOWED! Expandable or spray in foam may NOT be
used to secure radiator. Aluminum radiators are ok.
 Transmission coolers may be used if they are mounted securely in the rear seat area. Cooler lines must be steel or hydraulic hose. NO FUEL LINE!
 Carburetor linkage and transmission linkage may be modified. Carburetor may have a wire or cable running from throttle on carburetor to the inside of the car as a backup. Aftermarket throttle and brake pedal assemblies are allowed.
 Exhaust must be cut a minimum of 3 feet from the manifold. Headers through the hood are allowed.
 Batteries must be moved inside of the car to the front passenger floor area, mounted securely, and covered.
 All cars must have working brakes.
 No extra weight may be added to cars.
 No frame modifications or reinforcement.
 Pre-bending body tin and frame notching or dimpling is ok. NO REWELDING NOTCHES IN FRAME. No cold tilting.
 Maximum of 16” wheel. No split rims. Any air-filled tire is allowed. Tire flaps also allowed. Rims may have a bead lip protector welded to it. These may only be inside the bead lip and a max of an inch wide. You may also have a 8” weld in center.
 2 holes must be cut in hood one on each side of carburetor to aid in extinguishing fires.
 Bumpers may be fastened securely with chain, wire, bolts, or weld. (1 loop chain, 3 wraps #9 wire) in a fashion as to prevent them from falling off. Bumpers must be mounted with factory stock mounts and bolts only. If welding bumper, you may only weld the bumper to the shock and the shock to the bracket and the bracket to the frame. If you choose to not run shocks or brackets you may weld bumper directly to frame. Frame may be squared but no further back than an inch in front of the core support. CORE SUPPORT MUST BE IN STOCK POSITION. Bumper height must not exceed 18” to bottom of bumper. Stock bumpers only (tin may be beat down and welded to main beam of bumper). Bumper swapping is fine but it must be a factory bumper off of a passenger car. All welding may only be ½” bead of weld.
 Rear ends may be of passenger car origin, 5 lug only. Locked, posi, or spool is ok. No truck rear ends. May be different family line. You may have a slider driveshaft. You may have a pinion brake but may not support or brace the rearend in any way. You may run a chain or wire around rearend and frame for setting height (hump chains). REARENDS MUST BE A DIRECT FIT USING STOCK FACTORY MOUNTS. NO MODIFYING REARENDS OR MOUNTS TO FIT. NO BRACED REARENDS!
 For drivers' safety a cage is not mandatory but highly recommended. Cage can only be made out of 6-inch material welded to sheet metal ONLY. Side bars may be 12” material but must be a minimum of 4 inches off the floor. You are allowed a halo bar. The gas tank mount may be attached to seat bar and must be minimum 4 inches from ALL sheet metal. You may run bars from halo to the gas tank mount to allow more securement. 4 - 2”x3” down bars may connect vertically from bottom of cage to floor and may not connect to frame.

06/08/2024

Please
LIKE / COMMENT / and SHARE THIS POST!
1. No Limits Monster Trucks
2. Demo Derby $5,000 to Win!
3. Tuff Truck Races
4. Kids Power Wheels Races
5. Monster Ride Truck
6. Free Parking
Phone 940-577-2698 for more info
👀 😎😇🏁🚩