Checkered Flag Promotions

11/08/2024

https://www.facebook.com/share/p/14LRJTAWg6/

11/02/2024

Ed Beckley is feeling blessed with Anthony Barlow Robbie Williams Scott Gates

✅County & State Fairs recently we've been contacted by some of you wanting a new approach to doing an event there.
✅We are excited once again to be in the Fair business.
✅Get with us when you can we limits space in our calenda
r for 10 events.
✅We have openings now but they will be full soon.
Ed Beckley ph #940-577-2698
Robbie Williams 😎😇

10/28/2024

the Outlaw Wrangler Monster Truck Ride Truck in Hardy Murphy Coliseum- Ardmore Saturday Dec. 7th at the No Limits Monster Trucks & Thrill Show only $15 bux to ride in this real monster truck!
👍

09/21/2024

Event Fact sheet for Kalispell.

09/19/2024

Team Obsession always pushes the boundaries because there are No Limits in Kalispell SEPT. 28th 7pm
Get Discount Tickets Now on SALE nolimitsmonstertrucks.com/shop/
No Limits Monster Trucks & Thrill Show MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION Checkered Flag Promotions Checkered Flag Promotions No Limits Monster Trucks Group NWMT Fair Night of Destruction No Limits Monster Trucks

09/15/2024

Hispanic descent" just to let you know we celebrate this month with you!

09/12/2024

MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION
Here comes the EXCITEMENT & DESTRUCTION!
SATURDAY SEPTEMBER 28th 7pm
Kalispell, Montana Fairgrounds
For ticket go here> www.nolimitsmonstertrucks.com/shop/
🏁🏁🤣

MOTORSPORTS SPECTACULAR & NIGHT OF DESTRUCTION
SATURDAY - SEPT 28th - 7PM
Flathead County Fairgrounds
KALISPELL, MONTANA
TICKETS> www.nolimitsmonstertrucks.com/shop/

09/06/2024

Smashing Cars and Making Stars in Kalispell, Montana during the MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION No Limits Monster Trucks & Thrill Show
Coming to Kalispell on Saturday September 28th at 7pm! Rain or Shine we're going to get it on!

If you have a business and want to get involved in the largest Motorsports event in Montana get with us now! Find out how budget friendly tagging onto this event can be!

Big Ed Beckley
Phone or Text to 940-577-2698
MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION No Limits Monster Trucks & Thrill Show
No Limits Monster Trucks NWMT Fair No Limits Monster Trucks Group

08/30/2024

GET YOUR TICKETS NOW WHILE YOU HAVE A CHANCE! www.nolimitsmonstertrucks.com/shop/
No Limits Monster Trucks & Thrill Show
NWMT Fair MOTORSPORTS SPECTACULAR NIGHT OF DESTRUCTION

08/19/2024

Controlled Khaos Monster Truck from Wyoming is one of the new trucks to join our No Limits Monster Trucks & Night of Destruction September 28th in Kalispell, Montana!
We are very excited for this HUGE show!

08/08/2024

MONTANA Class 2 DEMOLITION DERBY RULES
Saturday Night Sept 28th 7pm
Kalispell NWMT Fairgrounds

RULES FOR CLASS:
ALL CARS MUST REMAIN STOCK UNLESS SPECIFIED BELOW!
 ALL chrome, door handles, glass, body molding etc. must be removed. ALL interiors must be removed. Removal of the dashboard and driver’s door panel are optional. Original gas tank must be removed from car.
 Fuel tanks must be mounted securely inside the car, behind the driver’s seat. 10-gallon max capacity. Must be an approved fuel tank (boat tanks are ok). MUST BE A METAL TANK! NO PLASTIC FUEL TANKS.
 Electric fuel pumps may be used but must be mounted securely inside the car and wired to a separate switch that is clearly marked.
You may have a minimum of 1 maximum of 2 bars mounted from the firewall to the roof in the windshield area (maximum of 3” material #9 wire or chain). If running bars, you may only use 2 bolts per end of bar.
 Trimming corners of bumpers and fender wells is ok. No fastening any inner panel or webbing to outer sheet metal unless specified in the rules (EXAMPLE: You can’t bolt inner fender to outer fender etc.).
 Hoods must be bolted, chained, or wired shut (maximum 1 wrap of 3/8” chains or 3 loops of #9 wire). NO WELDING SHUT. Maximum of 2 points per side (front, back, sides). Hinges DO NOT count as points. If bolting shut, you may weld 2”x2”x2” angle iron back-to-back to hood and fender with a ½” bolt to suck together in (4) spots. You may have 3/4" all thread at core support (through factory core support hole up through hood) with (4) 3x3 washers and (4) 3/4" nuts per side. May use factory body mount or one hockey puck per side.
 Trunks - Maximum of 2 points per seam (front, back, sides). Single wrap chain, 3 loops of #9 wire, 3|/8” bolt, or a 3”x3”x1/8” plate welded. Hinges DO NOT count as points. Bolts may be no longer than 5” in length with 1.25” washers.
 Doors - Maximum of 2 points per seam. Single wrap chain, #9 wire 3/8” bolt, or 3”x3”x1/8” plate welded. An optional plate can be bolted to the outer driver’s door skin for driver protection. Plate must be a min thickness of ¼” and max thickness of ¼” Max height of 16” and must go from door seam to door seam, plate may not exceed more than 3” past door seam on either side. Plate must be fastened with min of (6) – ½” bolts and up to a max of (10) – ½” bolts. Up to 3” diameter oversized washers may be used to prevent bolts from pulling through the door. An optional window “net” or “screen” made of metal may be used over driver’s side window opening ONLY for driver protection. May be attached at up to 2 points on the roof and 2 points on the door. Drivers’ door may be welded completely shut using a 3”x1/8” flat strap. THIS IS NOT
MANDATORY, BUT IS HIGHLY RECOMMENDED!
 No chains may wrap around the frame except the hump chains.
 Body bolts and mounts must remain stock and in stock location other than at core support. No adding extra body bolts
 You may weld (2) 2”x2” a-arm straps per upper a-arm. These may only weld to a-arm and frame with a ½” weld. No other suspension modifications allowed. Overload springs must be removed. Aftermarket shackles must be removed or lowered to the lowest point. Steering and shocks may not be modified. Aftermarket steering columns are allowed. No tying in coil springs and no clamping leaf's.
Engines and transmissions must remain stock and in stock location. Motors and transmissions may be different family line to make of car. Motors and transmissions must be mounted with factory stock mounts or an after-rubber bushing style mounts with (1) bolt. Mounts may be 8”x8” max. May be fastened securely with chain only (1 per side) bolted to engine and a-arm or a-arm mount only. No welding of chain. Small lower engine cradle with front plate may be used.
(NO WELDING OF ANY FORM OTHER THAN FACTORY ENGINE MOUNTS TO ENGINE SADDLE). FACTORY STOCK MOTORS AND TRANSMISSIONS ONLY.
 Engine bolt-Ons are allowed. This includes water pump, carb, distributor, aluminum intakes, headers, pulleys, etc.
 Radiators must remain stock and in stock location. Fans may be removed. No wire mesh between radiator and fan.
 NO OTHER COOLING IS ALLOWED! Expandable or spray in foam may NOT be
used to secure radiator. Aluminum radiators are ok.
 Transmission coolers may be used if they are mounted securely in the rear seat area. Cooler lines must be steel or hydraulic hose. NO FUEL LINE!
 Carburetor linkage and transmission linkage may be modified. Carburetor may have a wire or cable running from throttle on carburetor to the inside of the car as a backup. Aftermarket throttle and brake pedal assemblies are allowed.
 Exhaust must be cut a minimum of 3 feet from the manifold. Headers through the hood are allowed.
 Batteries must be moved inside of the car to the front passenger floor area, mounted securely, and covered.
 All cars must have working brakes.
 No extra weight may be added to cars.
 No frame modifications or reinforcement.
 Pre-bending body tin and frame notching or dimpling is ok. NO REWELDING NOTCHES IN FRAME. No cold tilting.
 Maximum of 16” wheel. No split rims. Any air-filled tire is allowed. Tire flaps also allowed. Rims may have a bead lip protector welded to it. These may only be inside the bead lip and a max of an inch wide. You may also have a 8” weld in center.
 2 holes must be cut in hood one on each side of carburetor to aid in extinguishing fires.
 Bumpers may be fastened securely with chain, wire, bolts, or weld. (1 loop chain, 3 wraps #9 wire) in a fashion as to prevent them from falling off. Bumpers must be mounted with factory stock mounts and bolts only. If welding bumper, you may only weld the bumper to the shock and the shock to the bracket and the bracket to the frame. If you choose to not run shocks or brackets you may weld bumper directly to frame. Frame may be squared but no further back than an inch in front of the core support. CORE SUPPORT MUST BE IN STOCK POSITION. Bumper height must not exceed 18” to bottom of bumper. Stock bumpers only (tin may be beat down and welded to main beam of bumper). Bumper swapping is fine but it must be a factory bumper off of a passenger car. All welding may only be ½” bead of weld.
 Rear ends may be of passenger car origin, 5 lug only. Locked, posi, or spool is ok. No truck rear ends. May be different family line. You may have a slider driveshaft. You may have a pinion brake but may not support or brace the rearend in any way. You may run a chain or wire around rearend and frame for setting height (hump chains). REARENDS MUST BE A DIRECT FIT USING STOCK FACTORY MOUNTS. NO MODIFYING REARENDS OR MOUNTS TO FIT. NO BRACED REARENDS!
 For drivers' safety a cage is not mandatory but highly recommended. Cage can only be made out of 6-inch material welded to sheet metal ONLY. Side bars may be 12” material but must be a minimum of 4 inches off the floor. You are allowed a halo bar. The gas tank mount may be attached to seat bar and must be minimum 4 inches from ALL sheet metal. You may run bars from halo to the gas tank mount to allow more securement. 4 - 2”x3” down bars may connect vertically from bottom of cage to floor and may not connect to frame.

08/06/2024

Please
LIKE / COMMENT / and SHARE THIS POST!
1. No Limits Monster Trucks
2. Demo Derby $5,000 to Win!
3. Tuff Truck Races
4. Kids Power Wheels Races
5. Monster Ride Truck
6. Free Parking
Phone 940-577-2698 for more info
👀 😎😇🏁🚩