Royal TV

19/11/2023

Don't watch the clock; do what it does. Keep going.

16/11/2023

The only way to achieve the impossible is to believe it is possible.

13/10/2023

Hard work beats talent when talent doesn't work hard.

29/09/2023

"It always seems impossible until it's done."
- Nelson Mandela

25/09/2023

"Dream big and dare to fail."
- Norman Vaughan

21/09/2023

"Your time is limited, don't waste it living someone else's life." - Steve Jobs

17/09/2023

"Don't watch the clock; do what it does. Keep going."
- Sam Levenson

14/09/2023

Success is not the destination; it's the result of your daily actions and unwavering commitment.

09/06/2023

Thank you.🥳🤩

31/05/2023

🛫 Building an RC (Radio Controlled) plane can be a fun and rewarding project. While the process may vary depending on the specific type of RC plane you want to build, here's a general outline of how you can create a simple RC plane:

Materials you will need:

Foam board or balsa wood: Choose a lightweight material that is easy to work with.
RC components: A receiver, transmitter, servos, ESC (Electronic Speed Controller), and a motor.
Propeller: Select an appropriate size for your plane.
Battery: Get a battery suitable for your motor and ESC.
Adhesive: Use hot glue or foam-safe glue to assemble the components.
Cutting tools: A hobby knife or a foam cutter to shape the materials.
Control rods and connectors: These will be used to connect the servos to the control surfaces.
Step-by-step process:

Design your plane: Decide on the size, shape, and wing configuration for your RC plane. You can find plans or templates online or create your own design.

Prepare the components: Install the motor onto the frame, attach the ESC, and connect the motor to the ESC. Mount the servos and connect them to the control surfaces (ailerons, elevator, and rudder).

Assemble the frame: Cut out the pieces of foam board or balsa wood according to your design. Use adhesive to join the pieces together, forming the fuselage and wings. Be sure to reinforce critical areas, such as the motor mount and wing attachment points.

Install the electronics: Place the receiver in a suitable location inside the fuselage. Connect the receiver to the ESC and servos according to the manufacturer's instructions. Secure the components using adhesive or tape.

Balance and adjust: Ensure that your plane is balanced correctly by placing the battery and other components in their intended positions. Make any necessary adjustments to achieve the proper balance. Also, ensure that the control surfaces are aligned and move smoothly.

Attach the propeller: Carefully mount the propeller onto the motor shaft, ensuring it is securely in place. Follow the manufacturer's instructions for propeller attachment and safety precautions.

Test and fly: Double-check all the connections, control movements, and battery charge. Find an open area, preferably away from obstacles, and launch your plane gently. Start with low throttle and gradually increase as you gain control and confidence.

Remember, this is just a basic overview of the process, and the specific steps may vary depending on the design and materials you choose. It's always a good idea to refer to detailed tutorials, plans, or seek guidance from experienced RC hobbyists for more specific instructions and tips.

19/05/2023

The only way to get started is to quit talking and begin doing.

04/05/2023

03/05/2023

02/05/2023

Crazy Dirt Jump

01/05/2023

The joy of making something with your own hands is unparalleled 💛💜🖤

29/04/2023

DIY is not just about creating something, it's about creating memories

27/04/2023

The beauty of DIY is that you can take something ordinary and turn it into something extraordinary

09/04/2023

DIY is not just about doing it yourself,
it's about knowing how to do it yourself.

04/04/2023

Some of the most common types of Mini RC Planes: 😍

Indoor RC planes: These are small and lightweight planes designed to fly indoors in a limited space. They are often made from foam or other lightweight materials and have a small motor that provides just enough power to keep them airborne.

3D RC planes: These planes are designed to perform advanced aerobatic maneuvers, including rolls, flips, and loops. They have a high power-to-weight ratio, large control surfaces, and are often made from carbon fiber or other lightweight materials.

Glider RC planes: These planes are designed to fly without an engine and rely on thermal updrafts and other natural air currents to stay aloft. They are often made from balsa wood or foam and have a wingspan of up to two meters or more.

Micro RC planes: These are the smallest type of RC planes available and are often no larger than a few inches in length. They are typically designed to fly indoors and are often powered by a small electric motor.

Warbird RC planes: These planes are modeled after classic military planes, such as the P-51 Mustang and the Focke-Wulf Fw 190. They are often made from foam or balsa wood and have a scale appearance with authentic markings and paint schemes.

Scale RC planes: These planes are modeled after real-life aircraft and are often built to exact scale specifications. They are often powered by a gas engine and are designed to fly at realistic speeds and altitudes.

VTOL RC planes: These planes are capable of vertical takeoff and landing and are often used for surveillance and reconnaissance purposes. They are often equipped with a camera or other sensors and can be controlled remotely from a ground station.

30/03/2023

26/03/2023

🤩

21/03/2023

Building an RC plane can be a fun for anyone who is interested in aviation and electronics.
Here are some general steps to follow:

Plan and Design: Begin by deciding what type of plane you want to build and sketch out a design. You can find many free plans and designs online to follow or modify.

Gather Materials: Once you have a design in mind, make a list of materials needed such as foam board, balsa wood, glue, servos, battery, motor, and propeller. You can purchase these materials from your local hobby shop or online.

Cut the Foam Board: Cut the foam board to the dimensions of your design using a sharp blade or a hot wire cutter.

Assemble the Wings: Glue the foam board pieces together to form the wings of your plane. Add any additional supports or braces as necessary.

Build the Fuselage: Use balsa wood or other materials to build the fuselage of your plane. Cut and shape the wood as necessary to fit your design.

Install the Motor and Electronics: Install the motor, servos, receiver, and battery according to the instructions provided with your kit or design. Be sure to test each component before installing them.

Connect the Control Surfaces: Connect the control surfaces such as the ailerons, rudder, and elevator to the servos using control rods or other connectors.

Add Finishing Touches: Add any decals, paint, or other finishing touches to your plane.

Test Flight: Before attempting to fly your RC plane, make sure to conduct a thorough pre-flight check and test the controls on the ground. When you are ready, launch your plane and begin your test flight.

Remember, building an RC plane requires patience, attention to detail, and careful planning.

18/03/2023

14/03/2023

Making an RC plane can be a fun and rewarding experience.
Here are some steps to help you make an RC plane:

Materials you will need:

Foam board or balsa wood
RC airplane kit
Electric motor
Servos
ESC
Battery
Propeller
Radio transmitter and receiver
Glue
Cutting tools
Paint

12/03/2023

Sunday is a day of rest, not a day of stress.

10/03/2023

To build a mini RC plane, you will need the following components:
-----------------------------------------------------------------------
RC Transmitter and Receiver: This is the primary component that allows you to control the plane remotely. The transmitter sends signals to the receiver, which is installed in the plane, to control its movement.

Brushless Motor: A small, lightweight, high-speed brushless motor is used to power the plane. You'll want to choose a motor with enough power to lift the weight of the plane.

Electronic Speed Controller (ESC): An ESC controls the speed of the motor and helps to regulate the amount of power that is sent to it.

Lithium Polymer (LiPo) Battery: A rechargeable LiPo battery provides power to the motor and other electronic components in the plane.

Servos: Servos are small motors that control the plane's movements, such as the ailerons, elevators, and rudder.

Propeller: A propeller is attached to the motor shaft and generates thrust to move the plane through the air.

Receiver Battery: A small battery is required to power the receiver installed in the plane.

Foam or Balsa Wood: You'll need some kind of lightweight material to construct the body of the plane. Foam or balsa wood are commonly used materials.

Glue: You'll need glue to attach the various components to the body of the plane.

Control Horns and Pushrods: These components connect the servos to the control surfaces of the plane.

Landing Gear: Depending on the design of your plane, you may need to attach landing gear to help with takeoff and landing.

Control Board: Optional, but some mini RC planes may use a control board to assist with stability and control.

These are the essential components needed to build a mini RC plane. Keep in mind that there are many different designs and configurations for RC planes, so the specific components you need may vary depending on the model you're building.

05/03/2023

Flying RC Boat 😍 don't miss the end 😄 | Super Creative

03/03/2023

Imagination is the beginning of creation. You imagine what you desire, you will what you imagine, and at last, you create what you will.