Both new smart caps modified.
I changed my design to include the original 450mah battery that lasts for around two hours in parallel with a new 2,500mah cell wired to the other side of the cap for balance.
Most people will say never parallel two different size cells... That's their option but my calculations say that providing they are connected together when both at the same voltage (in my case 4.1v) they will both share the load more fine, more for the bigger battery, and less for the smaller.
They both have their own protection so I'm totally fine with this set up. I see no reason to have an empty battery box when I can put the original battery back for a little extra capacity...
I'm doing a life test now as you see in the second video.
Currently at four hours... Gonna let it go flat then test the full capacity.
Will start uploading the graphics to the cloud so I don't have to draw all this again... It's a lot of work..
Mkii caps finally finished the upgrades. 2,500mah battery added to existing 450mah packs.
Sick of the unmodified cap going flat after after just a couple hours of use.
A bit pooped after hours spent over a hot soldering iron. I'm going to start creating some new animations after a few days break. Thinking of some scrolling bus destos, multi coloured (because our busses can't do it).
Already using scrolling text as train PIDs (in colour). The new caps do text at a much better speed than the old model.
Guy on bus liked the hat but I only heard "hat' before he ran off the bus... Feel terrible...
Yesterday man in woolies deli declared "best cap ever".... When showing merry x mas...
Love making ppl happy with the cap.
V4 caps still in the post, new software so not sure if any good but will have a go at it. Or sell them on.
Mixing work with pleasure
Fyi I tested that new pinspot for work... The one that's supposed to be 30w (3x more powerful than the one we have)...
No need to read, but here's the fine print...
It tests as 3w... Not 30w which is why I bought it... I'm so pissed... Off...
I just want this to work... Nice mirrorball, enough power if mama asks for a colour it still looks good... I'm getting tired of being sent junk... And yes I've adsorbed much of this cost too in all the returns... I can't afford it any more but it's not mamas responsibility.
So this next fixture I ordered cost $58 instead of $36... Wish me luck.. It's specs look much more realistic but the net does lie.. As i found out
Our current spot tested as 5w but looking at its brother that failed, it's badly designed and will melt its housing and die due to overheating. I can show you the one that failed... It's a mess inside. Melted plastic everywhere, the one onsite is probably going the same way.
So new one has a massive heat sink. No fan, it's rated at 20w (current one is Likly 5w, that sh*ty one was 3w)
Bottom line if anyone read all that...
I'm doing my best, with the funds I feel appropriate .. Let's hope the next one IS in fact 20w, if it is it will be 3x brighter than the one up there now, allowing us to c...... Allowing Mama to colour it... However she sees fit...
This project is on my reputation... And the only one that can stain my rep... Is me... I don't need any help thanks..
Thanks to the venue for testing me with this project... I WILL winn...
My mum... Yeah... She said smile in photos... So this video has a smile... It's not from the heart I'm afraid... I'm not smiling inside... But I know she's biased... She made me and I'm so proud to be her son...
But couldn't you have made me cute?
Mum... Awesome
Son... Handy for building a smart cap..
9.5 hours from a charge.. Very pleased.
Now to see how long it takes to charge to full.
In the meantime I just "very carefully" updated the firmware on my little projector.... Successfully... Phew
Battery topped up to full, now time to test life...
Time for another nap...
We're stocking the fridges.. Loading up the music and polishing the TV's...
We're ready for our singers tonight...
La Sing Karaoke Bar
261 Gouger St Adelaide 5000
8211 7332
La Sing... Adelaide's favourite karaoke... Open this Thursday night for free entry...
(Friday & Saturday $10 door charge)
La Sing Karaoke Bar... We don't do green so I have about 250 solder (at a guess) joints to do with my new special soldering iron to do.... Let's DO THIS....
Hmmm, had to rebuild LED cap as it seems something overloaded and melted the wiring!
One new charging circuit and one new panel later.... Remember I strap this thing to my head!
Think I can take it off now. Silicone should be set enough.
First opinion of my new Stadium pro microphone...
The power supply that says "switching power supply" is far too heavy to be a smps supply. Undid the screws, and I'm correct, it's a iron core Transformer inside... Not a good start...
While I had the electric screwdriver out I had a look inside the mic receiver to see if it *really* is true diversity (switches between two totally independent antennae or not) as this is real important to me. Inside it definitely has two separate receiving circuits.
After some testing I noticed that the display does in fact have "a" and "b" clearly marked on the display, they are just a bit hard to see with the odd font. I can in fact see it jumping between tuners so it is a genuine true diversity receiver as I hoped.
Sound quality is a little bassy, but the top is there too.
Power button requires a thumb nail to press really but I can operate it with my thumb.
Not too bad for $188 free post.
Jb HIFI also do them for about $220.
Just a little toy to amuse myself..
Bought it as a 32x8 but that crashes the controller and overloads the power bank... So 16 by 8 it is...
Proud to say I've now moved both Lasing and my vjkdigital sites to new severs, that offer SSL or secure connections. Both sites are now covered by SSL Certificates.
Considering I'm not exactly fluent in this stuff, I'm giving myself a small round of applause.
New screens fitted... All currently working, not a single bad dot on any screen. Cap also had a dead dot, so that got a new screen as well. (photo is of screen three before new panel.)
All screens on charge ready for Mecca karaoke and La sing karaoke testing tomorrow...
Had some questions... About this place..
This place is MY PLACE FOR MY Friends.. I know it's not easy to like me.. Hell... And does anyone love me with my bugs... Except her...
This post is about those screens.. I've worked so f**king hard on... A project that means zip to you.. But to me.. Give me purpose...
Result...
All three screens are working outside my design...
This has never happened to me... And I'm confused... My screens were designed to support... My venues... Cosmos club mainly.. And Switch events....
Design... 1.5m
Modified design... Unknown... But plus 20m...
New 3dbi antenna... And lots of swearing on mod 3... About 10 f**k ups... Last one... Worked...
And remember I don't do this for money.. I built these screens for my state of mind...
And they (3 screens) are free to any friend that cares enough to give me a purpose...
Or
Free to anyone that cares for me...
Seriously...
After all this work... This happened....
As mentioned it tested to 15m at home.
Wanting to test in a venue at La Sing Karaoke Bar...
Test unit has out measured the venue.. New antenna has outdone the size of the fkn venue...
I'm so proud....
My work... Has so exceeded my design... And I am happy... For once...
All built and ready for testing.
First new panel attached and working.
Outgoing panels, one new screen to attach, one whole new screen to build. Note the two meesed up columns and one missing dot.
No idea Clive cud do this...
He's got pride colours for my Smart Strips...
F**k me man... You just keep surprising me bud..