17/11/2023
We are closing our books for helmet orders as we are currently moving premises. We will still be able to process small items such as bracelets and models. These will need to be ordered via twonerdystudents.co.uk
Funding a dream project, and our lives at university! Hello, we’re two nerdy students. The shop i
We are closing our books for helmet orders as we are currently moving premises. We will still be able to process small items such as bracelets and models. These will need to be ordered via twonerdystudents.co.uk
Newcastle we are back! And this time we have expanded our stall and our range!
We’ve got some new models as well as some comic con exclusive 3D prints so come and say hi
We’ve been at MCM London today.
Not trading, maybe one day we’ll be big enough to trade at an MCM though.
We’ve met our two pop culture idols, Stephen Amell (aka Green Arrow) and Felicia Day (aka Charlie Bradbury from Supernatural.
We also met some amazing cosplayers and even refreshed the infamous Spiderman meme with Arrows!
Tomorrow is a bit of sightseeing and then the long drive back up north to Middlesbrough and carry on the prep work for Newcastle Unleashed from Monday.
When you’re preparing the models and they begin planning a coup 😂😂😂 Thankfully these guys will soon be boxed up and unable to collude (as soon as I reprint the eyes in the correct size) 😂 Once I have a finished non-prototype these guys will be available at www.twonerdystudents.co.uk
TwoNerdyStudents are going to York!
We’ve just booked York Comic-con for March 2024. This is the biggest convention that Unleashed Events run, after attending as guests this year we just couldn’t pass up the chance to trade there.
Future trader appearances tbc as Unleashed events are releasing all the tables within this fortnight so we will have to assess based on affordability and time with Masters degrees as work.
Turns out that the best way to paint the inside of the mouths is with a cotton bud. These guys (not one one on the right 😂) will be available at Newcastle comic con on 12th November and are already available at www.twonerdystudents.co.uk
This is why we prototype. You can see one of the eyes is damaged, it took a few attempts to find the right scaling for the white inserts and unfortunately one proved difficult to remove despite being too small, resulting in damage to the eye socket. The blast cap has also been coloured with a silver pen rather than sprayed so we could see how the final product would look without having to set up the spray booth for one piece. All the other parts have been printed in their final colours which will save time in production. These beautiful bob-ombs will be available next month at Newcastle comic con on November 12th. We will also be adding them to twonerdystudents.co.uk once we have a cleaner one to photograph 😅😅 We can’t wait to share these little guys with you all
We are in love with coloured filament right now. One of the main obstacles preventing us from preparing the 3D models for cons was the painting. We’ve now starting building a collection of coloured filaments and can now print each piece in its intended colour. Saving time and allowing us to bring even more amazing products to cons to share with you as we balance TwoNerdyStudents with our Masters degrees.
Newcastle Unleashed is in 5 weeks so the printers are as busy as ever. We’ve got some new filament which will allow us to bring some new 3d prints with us.
We’ve got some new Mario themed designs, a Kirby pixel art range, and possibly even a new Iron Man helmet all in the works for our final trader stand of 2023!
Don’t forget you can find all our current products, including custom helmets, at www.twonerdystudents.co.uk
Newcastle Unleashed is in 5 weeks so the printers are as busy as ever. We’ve got some new filament which will allow us to bring some new 3d prints with us.
We’ve got some new Mario themed designs, a Kirby pixel art range, and possibly even a new Iron Man helmet all in the works for our final trader stand of 2023!
Best table position ever. Perfectly placed to watch the amazing Lina and the Lions at Durham Comic-Con
We’re trading today at Durham Comic Con at the Rainton Arena.
Come check us out, we’ve got some new products with us today and a new range coming soon!
When the (current) First Doctor signs your TARDIS 😁😁😁
We are definitely nerdy as hell 😅
Getting suited up at York Unleashed. It’s nice to do some cons just as visitors.
We will be trading at Durham next Sunday
Happy 6 years to We'll Meet Again : WW2 Museum: Freiston!
Here’s to many more sharing the amazing stories and artifacts with the next generation x
We’ve been a bit quiet lately as it’s been chaotic with graduations and birthdays. But rest assured we’ve still been busily working away to prepare for Durham Comic Con next month.
Today we’ve also secured a table for Newcastle Comic Con in November!
We are super excited to be doing two more events with Unleashed Events this year and we can’t wait to share our amazing products with everyone
Find our full range at www.TwoNerdyStudents.com
Don’t forget, our full range is exclusively available on our new website!
Find us at:
TwoNerdyStudents
Our website is now live, however we are having an issue with the url where it is only working when using mobile data instead of WiFi. However our website provider has looked into this and it appears to be a local network issue
Thank you to everyone that came to see us today at Newcastle Comic Con.
We were very nervous for our first comic con and had a little bit of imposter syndrome but we made a good amount of sales for our first event.
We can’t wait to be even bigger and better at Durham in September.
Also a big thank you to Miku Plantman Art for the table cloth and all your support today. You made our first con so much less scary
Come say hi to us at Newcastle Comic-Con today!
Uni is over and I’ve no shift today so it’s full maker mode ready for next Sunday’s stall at Newcastle comic con while Luke is at work.
This poison type Pokémon prefers not to fight.
Who’s that Pokémon?
This ground type evolution attacks by curling into a ball and rolling into foes with its back, inflicting damage with its sharp spines.
Who’s that Pokémon?
Star Wars Day vs Tom Baker Day
Which side do you fall on?
We're a 50/50 split here at TwoNerdyStudents. Abi celebrates Tom Baker Day and Luke is absolutely a Star Wars Day person.
Comment your favourite Pokémon!
Comic con preparations are ramping up. We’ve just taken a delivery of boxes for the Boo models.
Some of you may remember we were working on them last summer, we’ve now perfected the printing and finishing process and the Boos will make their debut at Newcastle Comic Con
We've been a bit quiet these last few days. We've had a family bereavement at the beginning of this week. New content will be coming soon
We've booked another comic con!
If you can't make it to Newcastle in June you can catch us in September at Durham Comic Con
We may have just booked a second comic con with Unleashed events 🤫🤫
As well as Newcastle Comic-Con we will also be trading at the Durham event in September.
Its going to be a busy summer 🌞🌞🌞🌞
New time-lapse video coming soon
Use the link tree in our bio and find us on tiktok ❤️
Here’s an update on my suit, which you’ll be able to see at Newcastle Comic-Con on me or behind our stand, whether it’s finished or not.
Tony’s suit wasn’t a one piece so neither is mine!
This week it’s all about buckles and straps…. And hot glue!
Last time, I did a ton of welding! So now I’ve got loads of completed pieces that fit together pretty well. Just one problem, when I try and pick it up, it all falls to pieces.
The Solution? Buckles and straps! Obviously the pieces need to be held together somehow but, glue and welding are too permanent, sealing the pieces together, ruining my mobility, and making the suit a logistical nightmare to store and transport.
I began by creating some small sets of buckles and straps. Then, I lined the pieces up one at a time, as close as I could get to how I want them to hang on the suit. Lastly, I hot glue my buckles and straps across the joints of my suit to hold it together.
Now, the suit holds together when I need it to, and with the unclipping of a couple of buckles, it all breaks down back into individual parts.
Next up, I’ve got to get the back pieces attached to each other with the buckles, and then I need to work out how the back attaches to the front, with me in between. I’m thinking… Magnets!
The Project Continues….
We’ve started making our stock for Newcastle Comic-Con on June 18th. Be sure to check us out while you’re there.
We’ll even have some exclusive items that you won’t find on our Etsy 🤫
Our good friends at We'll Meet Again Museum are holding a raffle for the Kings Coronation.
All funds go to the museum and tickets are £5 per book.
It doesn't matter if you're not local, you can call up and purchase tickets.
First prize is a flight in a 1 hour flight in a Luscombe Plane and second prize is a half hour flight on the museum's one of a kind Lancaster Bomber VR Simulator
The museum is a charity so every little helps.
Happy Birthday to Darren, a key member of the team at We'll Meet Again.
Darren has taken on a lot of responsibilities at the museum since the summer including learning to run the VR flight simulator. We're so proud of our friend and hope he has an amazing birthday 🎂
We would all like to wish Darren Avison a very Happy Birthday for today, love Paul, Linda and all the Team at We'll Meet Again, have a great day mate! XX
Be the first to know and let us send you an email when Two-Nerdy-Students posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.
Happy 6 years to We'll Meet Again : WW2 Museum: Freiston! Here’s to many more sharing the amazing stories and artifacts with the next generation x
This water Pokémon is part of the original starter squad. Ash comes across a particularly fierce group of these Pokémon during the first season of the anime.Who’s that Pokémon? #beadsprites #pokemon #pixelart
Request This Pokémon is often the first wild encounter in the orginal games.Who’s that Pokémon?#beadsprites #pokemon #pixelart #requested
This female posion type evolution raises its barbs when it senses danger. The barbs grow more slowly than on the male evolution. Who’s that Pokémon? Who should we make next? Send us your requests in the comment section or message us on any of our socials! #beadsprites #pokemon #pixelart #whosyourfavorite
This ghost/poison Pokémon is the final stage of its evolution chain. It hides in the shadow of its prey and waits for a chance to strike.Who’s that Pokémon?#beadsprites #pokemon #pixelart #whosyourfavorite
Want your business to be the top-listed Event Planning Service?