PA and lighting system to suit small to medium venues for hire, mostly by bands working around the southern metropolitan Sydney, Illawarra and Shoalhaven regions in New South Wales Australia.
Hire includes delivery, set-up, mix/operation and pack down. The owner operator Mark Laidler has over 20 years’ experience working part-time in this segment of the entertainment industry. Please contact Mark on Messenger to privately exchange phone numbers or by email to [email protected] and find out if Giggin’ About can help you with your gig.
The PA is controlled by a QSC Touchmix 16 digital mixer with input from Shure and EV microphones and other direct inputs. Wireless mics not available.
Main or front-of-house (FOH) speakers are paired Electro-Voice (EV) ELX 18” (sub) and EV ELX 15”/horn (mid-high). One pair per side-of-stage, approximately 3000 watts @ 8 ohm (1) total Program (2), powered by Yamaha amplifiers.
Fold-back monitoring comprises six wedges and one drum fill configured in 4 to 6 sends. Approximately 3000 watts @ 4 ohm (1) total Program powered by Australian Monitor amplifiers. In-Ear monitoring is not available.
Lighting:
Standard set-up comprises front-line lights being eight PAR 56 incandescent lamps on two push up stands, with back-line lights being four PAR 56 incandescent lamps on one push up stand. These are controlled by a two-channel dimmer.
Footnote (1)
Estimated maximum potential
Footnote (2)
RMS: The safe level of pink-noise power a speaker can handle, more specifically the amount of heat the voice coil can disperse efficiently.
PROGRAM: Normally 2 x RMS. This is the safe level of music power a speaker can handle.
PEAK: Normally 2 x PROGRAM. This is the amount of power the speaker can handle in short bursts.